Xerox 5230 manual Browse, SMB UNC Format, Name/Protocol, Save in, Address Book, Details, Add J

Models: 5230

1 180
Download 180 pages 29.02 Kb
Page 129
Image 129
SMB (UNC Format)

Scan to PC

SMB (UNC Format)

Specifies the SMB protocol (using the UNC format).

NOTE: If Remote Authentication has been enabled, a popup message will prompt the user to enter a login ID and password before using the Scan to PC service. The login ID and password will be passed to the Kerberos server. Only when the user has been authenticated, the feature will be made available.

Address Book

This feature allows you to select a destination server from the Address Book. For information on how to register destinations, refer to the Setups chapter in the System Administration Guide.

1.Select [Address Book] on the [Scan to PC] screen.

2.From the Address Book list, select a destination server, and then select the [Add J] button.

3.Select [Close].

Name/Protocol

Displays the destination server information registered in the Address Book.

Details

Displays the detailed settings of a selected server.

Add J

Adds a selected destination server to the [Save in] field.

Save in

Displays a selected destination server and its details.

Browse

This feature allows you to select a location on the network to save a scanned document. Browsing starts at the workgroup level, proceeds to the server level, and then to multiple hierarchical levels of shared folders.

NOTE: The [Browse] button is grayed out and cannot be selected when [FTP] is selected for [Transfer Protocol]. This button does not appear when an IPv4 address is not assigned to the machine. For details on the protocol settings, refer to the Setups chapter in the System Administration Guide.

1.Select [Browse] on the [Scan to PC] screen.

2.Select the required options.

3.Select [Save].

129

Page 129
Image 129
Xerox 5230 manual Browse, SMB UNC Format, Name/Protocol, Save in, Address Book, Details, Add J