40
3. Align the cursor with SET and press PROCEED
* When the timer has been set, the LED will flash orange
every 3 seconds during remote control standby.
Timer Screen
This sets the date and time.
1. Align the cursor with icon (11) of the second page.
Icon (11)
The cursor is moved left and right with the POSITION
CONTROL§ / © buttons.
2. Use the ▲ / ▼ buttons to move to each of the year,
month, day, hour, and minute positions, and the § /
© buttons to set the numbers.
POSITION / CONTROL
Numbers go
DOWN
Cursor moves in
the reverse direction
Number go UP
Cursor moves in
ordered direction
Setting range of date and time settings
Year: 1999 to 2099, Month: JAN to DEC, Day: 01 to 31
Hours: 00 to 24, Minutes: 00 to 59
PROCEED
PRESENT TIME
DATE : 1999. DEC 10
TIME : 22 : 30
SET
TIMER : OFF
PRESENT TIME
DATE : 1999. DEC 10
TIME : 22 : 30
SET
TIMER : OFF
Note:
Data can be maintained for about one
month by the built-in lithium battery even when the
AC cable is disconnected.