5. Attach the cable cover
¥Remove the six screws (Figure 4).
¥Use 6 of the M4 x 10 screws (included) to attach the cable cover (Figure 5).
Figure 4
Figure 5
6.Switch on the power of all the attached external equipment
When connected with a computer, switch on the power of the computer first.
7.Operate the attached external equipment
Display the signal from the desired input source.
8. Adjust the sound
Make adjustments when adjustment of the volume is required.
9. Adjust the screen (See pages 24 and 25)
Make adjustments of the screen display position when necessary.
10. Adjust the image (See page 24)
Make adjustments such as brightness or contrast when required.
11. Recommended Adjustments
To reduce the risk of the Òimage persistenceÓ, please adjust the following items based on the application being used: ÒSCREEN SAVERÓ, ÒSIDE BORDER COLORÓ (See page
27)ÒDATE & TIMEÓ, ÒSCHEDULE SETTINGSÓ (See page
25). It is recommended that the ÒFAN CONTROLÓ setting (See page 27) be turned to ON also.
English
Downloaded From
