NEC 50MP1 manual

*1 Only when using a graphic accelerator board that is capable of displaying 852×480.

*2 This signal is converted to a 1228 dots × 768 lines signal.

*3 The picture is displayed in the original resolution.

*4 The aspect ratio is 5:4. This signal is converted to a 960 dot×768 line signal.

*5 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the RGB mode prepared for the input signals listed in the table above.

*6 To connect the monitor to Macintosh computer, use the supplied monitor adapter (D-Sub 15-pin) to your computer's video port. If your computer has a mini D-Sub 15-pin connector, you may have to use the supplied RGB cable.

*7 Other screen modes (ZOOM and STADIUM) are available as well.

NOTE:

•While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size of the picture or the fine picture because of errors in synchronization of your computer.

•When a 1280 dot × 1024 line signal or 1600 dot × 1200 line signal is input to the monitor, the picture will be compressed.

•This monitor has a resolution of 1365 dot × 768 line. It is recommended that the input signal should be XGA, wide XGA, or equivalent.

•With digital input some signals are not accepted.

•The sync may be disturbed when a nonstandard signal other than the aforementioned is input.

•If you are connecting a composite sync signal, use the HD terminal.

*“IBM PC/AT” and “VGA” are registered trademarks of IBM, Inc. of the United States.

*“Apple Macintosh” is a registered trademark of Apple Computer, Inc. of the United States.

48

Image 55

NEC 50MP1 user manual

Contents

User’s Manual Important Information Precautions To avoid damage and prolong operating life Avertissement PrécautionsDOC avis de conformation Mises en garde et précautions de sécurité Remarque Limited Warranty Plasma Monitors Contents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma Monitor Introduction to the PlasmaSync 50MP1 Plasma Monitor Features you’ll enjoy includeContents of the Package Introduction Front View Part Names and Function RGB Rear View/ Terminal Board RGB/PC Remote Control Unit 5MULTI Battery Installation and Replacement Approx 7m/ 23ft Using the wired remote control modeHandling the remote control unit Operating Range Personal computer with a digital RGB output Installation Connections with Equipment that has a Digital Interface Connecting Your Document CameraConnecting Your VCR or Laser Disc Player Connecting Your DVD Player Right Left External Speaker Connections RGB Pin Assignments and Signal Levels for 15 pin RGB Analog Basic Operations To check the remaining time To set the off timerTo cancel the off timer After the power is turned off with the off timer Watching with a wide screen manual When watching videos or digital video discsWhen watching high definition video source Wide Operations Watching computer images with a wide screen When Picture Size is set to OFF Supported resolution Picture Size setting Showing a couple of pictures on the screen at the same time Selecting the input signals to be displayedAdjusting the OSM controls Multi Screen Operations Menu Operations OSMOn Screen Menu Controls Main menu Sub menu Functions Adjusting the computer image Picture Settings MenuAdjusting the picture Picture adjustment screen Types of picture modes Example Setting the Theater mode Setting the color temperature Setting the color temperatureExample Setting Once the setting is completed Example Adjusting the White Balance Adjusting the color to the desired quality Adjusting the white balance Types of noise reduction Example Setting NR-3Reducing noise in the picture NR Sound settings menu Sound Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bass When Auto Picture is OFF Screen Settings MenuAdjusting the Position, Size, Fine Picture, PictureAdj Example Adjusting the vertical position in the normal mode Setting the on-screen display Function Settings Menu Adjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the position Power management settings Setting the power management for computer imagesExample Turning the power management function on Power management function Description Turning the picture back on POWER/STANDBY indicator Cinema Mode Setting the picture to suit the movieExample Adjusting the Gray Level Example Setting the Cinema Mode to OFF Reducing burn-in of the screen Setting RGB3 ADJExample Setting PLE to Lock When you adjust the RGB3 ADJ Inverse Resetting to the default valuesPLE Orbiter Audio Input Option Settings MenuSetting the allocation of the audio connectors Setting the BNC connectors BNC Select Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to Motion HD Select modes Setting high definition images to the suitable screen sizeExample Setting the 1080B mode to RGB Select modes Picture Size Setting the picture size for RGB input signalsExample Setting the on mode to OFF Information Menu Example Setting the video signal format to 3.58 Ntsc Setting the language for the menusSetting the video signal format Example Setting the menu display to Deutsch Ntsc Video signal formats Connections Type of connector D-Sub 9-pin maleExternal Control Application Unit ID 1 and Unit ID CommandCheck Sum CKS, Error Processing, and ACK Communication Format Command Reference List Color Gain Data Audio Mute OnAudio Mute Off OSM Select Bright Gain Data Input Mode RequestSharpness Gain Data Contrast Gain Data Multi Screen Select RED Gain DataGreen Gain Data Blue Gain Data Video ADJ Request Long Life Set Failure Mode RequestAudio Select Set Audio Select Request Supported resolution Table of Signals SupportedComputer input signals supported by this system Page Symptom Checks Remedy Troubleshooting Signals SpecificationsPage Page NEC T