NEC 61XM3 user manual Setting the Input Skip, Resetting to the default values

CONFIDENTIAL

Information

⬛RGB SELECT modes

One of these 7 modes must be selected in order to display the following signals correctly.

AUTO: Select the suitable mode for the specifications of input signals as listed in the table “ Computer input signals supported by this system” on page E-2 of Model Information.

STILL: To display VESA standard signals. (Use this mode for a still image from a computer.)

MOTION: The video signal (from a scan converter) will be converted to RGB signals to make the picture more easily viewable. (Use this mode for a motion image from a computer.)

WIDE1: When an 852 dot× 480 line signal with a horizontal frequency of 31.7kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE1.

WIDE2: When an 848 dot× 480 line signal with a horizontal frequency of 31.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE2.

WIDE3: When an 1920 dot× 1200 line signal with a horizontal frequency of 74.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE3.

DTV: Set this mode when watching digital broadcasting (480P).

See page E-2 of Model Information for the details of the above settings.

Setting the Input Skip

When this is ON, signals which are not present will be skipped over and only pictures whose signals are being transmitted will be displayed.

This setting is valid only for the INPUT SELECT button on the unit.

Example: Set to “ON”

On “ INPUT SKIP” of “ OPTION1” menu, select “ ON” .

		OPTION1		1 / 4
OSM
BNC INPUT			:	RGB
D-SUB INPUT			:	RGB
RGB SELECT			:	AUTO
HD SELECT			:	1080B
	INPUT SKIP		:	ON
ALL RESET			:	OFF
	NEXT PAGE
	SEL.	ADJ.		EXIT	RETURN

Information

⬛INPUT SKIP settings

OFF: Regardless of the presence of the signal, scan and display all signals.

ON: If no input signal is present, skip that signal.

* “ SETTING NOW” will appear during the input search.

Resetting to the default values

Use these operations to restore all the settings (PICTURE, AUDIO, IMAGE ADJUST, OPTION1~4, etc) to the factory default values.

Refer to page E-16 for items to be reset.

On “ ALL RESET” of “ OPTION1” menu, select “ ON” , then press the MENU/ENTER button.

Setting high definition images to the suitable screen size

Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080.

Example: Setting the “1080B” mode to “1035I”

On “ HD SELECT” of “ OPTION1” menu, select “ 1035I” .

			OPTION1		1 / 4
OSM
BNC INPUT				:	RGB
D-SUB INPUT				:	RGB
RGB SELECT				:	AUTO
	HD SELECT			:	1035 I
INPUT SKIP				:	OFF
ALL RESET				:	OFF
		NEXT PAGE
		SEL.	ADJ.		EXIT	RETURN

Information

⬛HD SELECT modes

These 3 modes are not displayed in correct image automatically.

1080B: Standard digital broadcasts

1035I: Japanese “ High Vision” signal format

1080A: Special Digital broadcasts (for example : DTC100)

		OPTION1			1 / 4		ALL RESET
OSM
BNC INPUT				:	RGB
D-SUB INPUT				:	RGB
RGB SELECT				:	AUTO		SETTING NOW
HD SELECT				:	1080B
INPUT SKIP				:	OFF
ALL RESET				:	ON
	NEXT PAGE
	SEL.	MENU/ENTER	OK		EXIT	RETURN

When the “ SETTING NOW” screen disappears, then all the settings are restored to the default values.

Downloaded From TV-Manual.com Manuals E-22

4-26