10
Monitor DiamondPoint SB70 Notes
Specifications Monitor
Picture Tube Diagonal: 17 inch 90° deflection, 0.25 mm grille pitch,
Viewable Image Size: 16 inch medium short persistence phosphor,
Radius: 50,000 mm aperture grille CRT, multi-layered,
anti-static screen coating, dark-tint screen
and OptiClear
®
screen.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal: 30 kHz to 70 kHz Automatically
Range Vertical: 50 Hz to 120 Hz Automatically
Resolutions Supported 640 x 480 @ 60 to 120 Hz
Some systems may not support
Resolution based on
horizontal and
800 x 600 @ 50 to 110 Hz
all modes listed.
vertical frequencies only
832 x 624 @ 50 to 106 Hz
1024 x 768 @ 50 to 87 Hz .......................
NEC-Mitsubishi Electronics Display cites
1152 x 864 @ 50 to 77 Hz
recommended resolution at 85 Hz for
1280 x 1024 @ 50 to 66 Hz
optimal display performance.
Active Display Area Horizontal:
315 mm/12.4 inches Dependent upon signal timing used,
(Factory Setting) Vertical:
236 mm/9.3 inches and does not
include border area.
Active Display Area
325 mm/12.8 inches Dependent upon signal timing used,
(Full Scan)
244 mm/9.6 inches and does not
include border area.
Power Supply
AC 100 – 240 V, 50-60 Hz
Current Rating 1.5A @ 100-240 V
Dimensions
397 mm (W) x 392 mm (H) x 415.5 mm (D)
15.6 inches (W) x 15.4 inches (H) x 16.4 inches (D)
Weight 16.8 kg
37.0 lbs
Environmental Considerations
Operating Temperature: +5°C to +35°C / +50°F to +90°F
Humidity: 10% to 90%
Feet: 0 to 10,000 Feet
Storage Temperature: -20°C to +60°C / -4°F to +140°F
Humidity: 10% to 90%
Feet: 0 to 50,000 Feet
NOTE: Technical specifications are subject to change without notice.
SpecificationsDPSB70Manual.p65 5/7/02, 11:32 AM10