Controls cont.
GlobalSync® Control (MultiSync® E950™ only): Eliminates picture impurities that may result from the earth’s magnetic field. Adjusting the control bar will change the display’s rotation in a clockwise or counterclockwise direction.
Note: NEC recommends that you perform GlobalSync correction while running a typical application such as a spreadsheet or text document.
Factory Preset: Selecting Factory Preset allows you a reset most OSM™ control settings back to the factory settings. A warning statement will appear to confirm that you do want to reset ALL settings. Individual settings can be reset by high- lighting the control to be reset and pressing the RESET button.
Tools 2
Language: OSM controls menus are available in seven languages.
OSM Turn Off: The OSM controls menu will stay on as long as it is in use. In the OSM Turn Off
OSM Lock Out: This control completely locks out access to all OSM controls functions except Brightness and Contrast. When attempting to activate OSM controls while in the lock out mode, a screen will appear indicating that OSM controls are locked out. To activate the OSM Lock Out function, press PROCEED, then press 
and hold down simultaneously. To deactivate the OSM Lock Out, press PROCEED, then press 
and hold down simultaneously.
IPM™ System Off Mode: Enable: The IPM System works normally and all stages of energy savings are utilized.
Disable: The Off Mode of the IPM System is not used.
NOTE: For standard systems and graphics boards, keep the factory setting at ENABLE.
Refresh Notifier: A message will advise you if the refresh rate of the signal being applied to the monitor by the computer is too low. For further information, please refer to your display card or system manual.
Information
Display Mode: Indicates the current mode and frequency setting of the monitor.
Monitor Info: Indicates the model and serial numbers of your monitor.
7
78134381.wpc | 9 | 11/25/98, 2:40 PM |
