Quick Start
To attach the MultiSync LCD monitor to your system, follow these instructions:
1.Turn off the power to your computer.
2.For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws.
For the PC with Analog output: Connect the
For the MAC: Connect the Macintosh cable adapter to the computer, then attach the
DVI signal cable
Figure A.1 | Figure A.2 |
Macintosh
Cable Adapter Figure B.1 (not included)
NOTE: Some Macintosh systems do not require a Macintosh cable adapter.
3.Place hands on each side of the monitor to tilt the LCD panel
4.Connect all cables to the appropriate connectors (Figure C.1). Connect the Headphone (not included) to the appropriate connector at the left side of the monitor (Figure C.1).
30û Tilt
Highest |
|
Stand |
|
Position | DVI Cable |
|
Headphone
Audio Input
Input1 (DVI)
Input2
Power Cord