NEC204 Eng.Fr.manual 10/26/98 10:20 AM Page 7
MultiSync® Monitor Model Names
MultiSync 50, MultiSync 70, XV15 and XV15+
Step 1 With the monitor unplugged from your system and the wall outlet, carefully turn the monitor upside down on
a firm table so that the base is facing up as shown
in Figure 1.
MONITOR IN POSITION TO
REMOVE THE BASE AND ATTACH
INTELLIBASE USB HUB
BASE
Figure 1
Step 2 Using a Phillips screwdriver, remove the screw securing the original base to the monitor as shown in Figure 2A. Remove and save the original base for possible future use.
Note: Do not remove the spindle or swivel plate.
Figure 2A
BASE
DO NOT REMOVE SPINDLE OR
SWIVEL PLATE
SWIVEL
PLATE
SPINDLE
3
