NEC user manual Specifications for MultiSync LCD175VXM+, Monitor Specifications, English-11

Specifications for MultiSync LCD175VXM+

Monitor Specifications			MultiSync LCD175VXM+ Monitor	Notes
LCD Module		Diagonal:	43 cm/17 inches	Active matrix; thin film transistor (TFT)
	Viewable Image Size:		43 cm/17 inches	liquid crystal display (LCD); 0.264 mm dot
Native Resolution (Pixel Count):			1280 x 1024	pitch; 300 cd/m2 *2 white luminance, 700:1
				contrast ratio, typical; response time: 5 ms.
Input Signal		Video:	ANALOG 0.7 Vp-p/75 Ohms	Digital Input: DVI-D
		Sync:	Separate sync.TTL Level (Positive/Negative)
			Horizontal sync. Positive/Negative
			Vertical sync. Positive/Negative
Display Colours		Analog input:	16,7 M	Depends on display card used.
Synchronization Range		Horizontal:	31.5 kHz to 81.1 kHz	Automatically
		Vertical:	56 Hz to 76 Hz	Automatically
Viewing Angle		Left/Right:	-80¡/+80¡ (CR>10), -88¡/+88¡ (CR>5)
		Up/Down:	-75¡/+85¡ (CR>10), -85¡/+85¡ (CR>5)
Resolutions Supported		Landscape:	720 x 400*1 : VGA	Some systems may not
			640 x 480*1 @ 60 Hz to 75 Hz	support all modes listed.
			800 x 600*1 @ 56 Hz to 75 Hz
			832 x 624*1 @ 75 Hz
			1024 x 768*1 @ 60 Hz to 75 Hz
			1152 x 864*1 @ 70 Hz to 75 Hz
			1152 x 870*1 @ 75 Hz
			1280 x 960*1 @ 60 Hz to 75 Hz	Recommended resolution is 60 Hz for
			1280 x 1024 @ 60 Hz to 75 Hz................... optimal display performance.
Active Display Area		Horizontal:	337.9 mm
		Vertical:	270.3 mm
Speakers	Practical Audio Output:		1.0 W + 1.0 W
Power Supply			100 - 240 V ~ 50/60 Hz
Power Consumption			34 W
Dimensions		Landscape:	368.0 mm (W) x 358.5 - 408.5 mm (H) x 230.0 mm (D) (with stand)
			368.0 mm (W) x 320.5 mm (H) x 61.0 mm (D) (without stand)
Weight		with stand:	4.8 kg
		without stand:	3.8 kg
Environmental Considerations
	Operating Temperature:		5 ¡C to 35 ¡C
		Humidity:	30% to 80%
		Altitude:	0 to 3,048 m
	Storage Temperature:		-10 ¡C to +60 ¡C
		Humidity:	10% to 85%
		Altitude:	0 to 12,192 m

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

*2 LCD Module at 25¡C.

NOTE: Technical specifications are subject to change without notice.

English

English-11