Quick Start –continued
Removing the Base
Note: Always remove the Base when shipping the LCD.
1. Place monitor face down on a
2.While using your thumbs, press the bottom tabs upward to unlock.
3.Press the top tabs down to unlock and pull off the stand.
Connecting a Flexible Arm
This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor should only be used with an approved arm (e.g. GS mark).
12 mm
M4 
100 mm
Specifications
4-SCREWS (M4)
(MAX depth: 8.5 mm)
4 x 12 mm with lock washer and flat washer
Thickness of Bracket (Arm) 2.0~3.2 mm
Tighten all
screws.
100 mm
Weight of LCD assembly: 3.6 kg - LCD17V (MAX) 4.9 kg - LCD19V (MAX)
