NEC LCD1800TM manual AccuColor Control Function, Location Considerations, Cleaning Your Monitor

1.10AccuColor® Control Function

The following color modes are available:

1.sRGB: sRGB mode dramatically improves the color fidelity in the desktop environment by a single stan- dard RGB color space. With this color supported environment, the operator could easily and confi- dently communicates color without further color man- agement overhead in the most common situations. We recommend you set the monitor to "Graphics" mode. (Unadjustable.)

2.VIDEO: Suitable for motion picture. (Unadjustable.)

3.NATIVE: Original color presented by the LCD panel. (Unadjustable.)

4.CUSTOM: The following items are adjustable.

COLOR TEMPERATURE: 5000K~9600K

COLOR CONTROL: This function enables inde- pendent adjustment of 6 color (Red, Yellow, Green, Cyan, Blue and Magenta) elements and color saturation.

COLOR RESET: To restore to the color tempera- ture and color control to the factory preset.

1.11Location Considerations

When setting up and using the monitor, keep the following in mind:

•For optimum viewing, avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the display area of the monitor; place the monitor just below eye level.

•Avoid covering the slots or openings of the monitor. Allow adequate ventilation around the monitor so the heat from the monitor can properly dissipate. Avoid putting the monitor into any enclosure that does not have adequate ventilation.

•Avoid exposing the monitor to rain, excessive mois- ture, or dust, as this can cause a fire or shock hazard.

•Avoid placing the monitor, or any other heavy object, on the power cord. Damage to the power cord can cause a fire or electrical shock.

•When transporting the monitor, handle it with care.

•Avoid giving any shock or scratch to the screen, as the screen is fragile.

1.12Cleaning Your Monitor

When clean the monitor, please follow these guidelines:

•Always unplug the monitor before cleaning.

•Wipe the screen and cabinet front and sides with a soft cloth.

•Do not spray directly on the screen as excess cleaner may drip into the monitor causing a damage.

Do not use benzene, thinner or any volatile substances to clean the unit as the finish may be permanently marked. Never leave the monitor in contact with rubber or vinyl for an extended time period.

1.13Unpacking

After you unpack the box you should have all of the items indicated in Figure 1. Save the box and packing materials in case you ship or transport the monitor.

1 2

3 4

Figure 1

1.Multisync® LCD1800™ Monitor

2.Power Cord

3.AC-Adapter

4.User’s Guide (this booklet)

1.14Tilt Base

The monitor comes with a tilt base. This enables you to position the monitor to the best angle for maximum viewing comfort.

Screen Position Adjustment

Adjust the tilt of the monitor by placing your hands at opposite sides of the case. You can adjust the monitor as shown in Figure 2.

�

Figure 2

CAUTION

Keep your fingers away from the pivot area of the tilt/swivel base.

- 1-4 -