NEC LCD1920NX manual Remove Monitor Stand for Mounting, Figure R.1

Quick Installation –continued

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1.Disconnect all cables.

2.Place monitor face down on a non-abrasive surface (Figure R.1).

3.Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure R.1). The monitor is now ready for mounting in an alternate manner.

4.Connect the AC cord and signal cable to the back of the monitor.

5.Reverse this process to reattach stand.

Non-abrasive surface

Figure R.1

NOTE: Use only VESA-compatible alternative mounting method.

6.This LCD monitor is designed for use with a flexible arm.

Please use the attached screws (4pcs) as shown in the picture when installing.

To meet fhe safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor.

The LCD monitor shall only be used with an approved arm (e.g. GS mark).

Replace screws.

5