All of these control capabilities are made possible using the advanced remote diagnostics and remote control capabilities of the Display Data Channel/Command Interface (DDC/CI). This allows control commands to be sent directly to the monitor by the local system or remotely over an existing network (LAN) by a system administrator. In order to take full advantage of these benefits, users must use a
Also controlled through the Advanced OSM is TileMatrix, which allows you to build video walls of various configurations. With the use of a simple video amplifier and a standard video card, this feature saves you time and money compared to other connection solutions. With the ability to utilize up to 25 monitors (5 x 5 configuration) that display a shared image, you can build an impressive video wall for various applications, including advertising and tradeshows. TileComp works in tandem with TileMatrix to compensate for the width of tiled bezels and optimally display still images.
Another
Wide compatibility for today and tomorrow. Ambix+™ technology provides the widest range of computer video compatibilities between analog and digital systems by allowing the same monitor to work seamlessly in either environment. The
Intelligent power management ensures a smart investment. Using approximately 50% less power and emitting less heat than comparable CRT monitors, the MultiSync LCD1980FXi allows you to conserve energy and lower your total cost of ownership. Many technologies contribute to these savings, including the automatic
OSM is a registered trademark, and Advanced No Touch Auto Adjust, | NEC Display Solutions of America, Inc. |
AmbiBright, Ambix+, AutoBright, GammaComp, NaViSet, Rapid Motion, | 500 Park Boulevard, Suite 1100 |
Rapid Response, TileMatrix, TileComp, XtraView+, are trademarks of | Itasca, IL 60143 |
NEC Display Solutions of America, Inc. ENERGY STAR is a U.S. registered |
|
trademark. All other brand or product names are trademarks or | www.necmitsubishi.com |
registered trademarks of their respective holders. |
|
©2005 NEC Display Solutions of America. 3/05 ver.1. |
|
Model
Display
Viewable Image Size
Pixel Pitch
Pixels Per Inch
Brightness (typical)
Contrast Ratio (typical)
Viewing Angle (typical)
Response Time (typical)
Display Colors
Synchronization Range
Horizontal
Vertical
Input Signal
Video
Sync
Input
Resolutions Supported
Native Resolution
Additional Features
Touch/Protective
Voltage Rating
Power Consumption (typical)
On
Power Savings Mode
Dimensions (W x H x D)
Net (with stand) Net (without stand)
Weight
Net (with stand) Net (without stand)
VESA Hole Configuration Specs.
Environmental Considerations
Operating Temp.
Operating Humidity
Operating Altitude:
Storage Temp.
Storage Humidity
Storage Altitude:
Limited Warranty
Technical Support
NEC MultiSync LCD1980FXi
19"/48.2 cm 0.294mm
86 @ native resolution
270cd/m2 600:1
178° Vert., 178° Horiz. (89U/89D/89L/89R) Rapid Response (18ms)
16.77 million
31.5- 81.1 kHz
50 - 85 Hz
Analog 0.7
Separate Sync: TTL Level (positive/negative)
Composite Sync: TTL Level (positive/negative)
Composite Sync on Green (0.3
Analog/Digital:
720 x 400 @ 70 - 85 Hz
640 x 480 @ 60 - 85 Hz
800 x 600 @ 56 - 85 Hz
832 x 624 @ 75 Hz
1024 x 768 @ 60 - 85 Hz
1152 x 864 @ 70 - 85 Hz
1152 x 870 @ 75 Hz
1280 x 960 @ 60 Hz
1280 x 1024 @ 60 - 75 Hz
1280 x 1024 @ 60 Hz
Designed for integration
Universal 100
48W
<2W
402.3x 364.8 x 200mm / 15.8 x 14.4 x 7.9 in.
402.3x 330.3 x 77.5mm / 15.8 x 13 x 3.1 in.
21.4lbs/9.7 kg
13.9lbs/6.3 kg
100mm x 100mm
3048 m/10,000 ft
12,192 m/40,000 ft
3 years parts and labor, including backlight
24 hours/7 days
NOTE: Technical specifications are subject to change without notice.