English
|
| |
Figure R.1 | Figure R.2 | Figure R.3 |
Removing the Base |
| Locking tabs |
|
|
NOTE: Always remove the Base when shipping the LCD.
1.Place monitor face down on a
2.While using your fingers, press the 3 locking tabs of left or right side at the same time to unlock the Base.
3.While using your fingers, press the 3 locking tabs of another side at the same time to unlock the Base.
4.Pull out the unlocked Base.
Connecting a Flexible Arm
This LCD monitor is designed for use with a flexible arm.
Please use screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which, guaranties the necessary stability under consideration of the weight of the monitor.
The LCD monitor shall only be used with an approved arm (e.g. GS mark).
NOTE: The mounting stand shall be able to sustain at least 21 kg and UL certified.
Specifications
(MAX depth: 10 mm) If use other screw, check depth of hole.
12 mm |
M4 |
4 x 12 mm with lock washer
and flat washer
100 mm
100 mm
Thickness of Bracket (Arm) 2.0 ~ 3.2 mm
Tighten all screws
Weight of LCD assembly: 4.8 kg (MAX)
