Controls - continued

EXIT

Selecting EXIT allows you exit OSD menu/sub menu.

LANGUAGE

OSD control menus are available in seven languages.

OSD TURN OFF

The OSD control menu will stay on as long as it is in use. In the OSD Turn OFF submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are 10 - 120 seconds in 5 second intervals.

OSD LOCK OUT

This control completely locks out access to all OSD control functions without Brightness, Contrast and Volume. When attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating the OSD are locked out. To activate the OSD Lock Out function, press “1<->2 / RESET“, then “+“ key and hold down simultaneously. To deactivate the OSD Lock Out, press “1<->2 / RESET“, then “+“ key and hold down simultaneously.

EXPANSION

Selects the zoom mode.

FULL: The image is expanded to 1440 x 900 (LCD174WXM/ LCD194WXM), or 1680 x 1050 (LCD224WXM) regardless of resolution.

ASPECT: The image is expanded without changing the aspect ratio.

DDC/CI

Turns on or off the two-way communication and control of the monitor. With DDC/CI turned on, some monitor settings can be adjusted through the graphics card using a computer.

MONITOR INFO

Indicates the model and serial numbers of your monitor.

OSD Warning: OSD Warning menus disappear with SELECT button.

NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the No Signal window will appear.

OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned on or there is a change of input signal or the video signal doesn’t have proper timing, the Out Of Range menu will appear.

9

Page 11
Image 11
NEC LCD194WXM Selecting Exit allows you exit OSD menu/sub menu, OSD control menus are available in seven languages