NEC LCD225WNXM, LCD205WNXM user manual Contents, Quick Start

Contents

Your new NEC MultiSync LCD monitor box* should contain the following:

¥MultiSync LCD monitor with tilt base

¥Audio Cable

¥Power Cord

¥Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male)

¥Video Signal Cable (DVI-D to DVI-D) (LCD225WNX only)

¥USB Cable (LCD205WNXM/LCD225WNXM only)

¥UserÕs Manual

¥ Cable Management Cover ¥ CD-ROM

			Cable Management		Power Cord*2
		CD-ROM
UserÕs				Cover
Manual
UserÕs Manual	Audio Cable	15-pin mini D-SUB		DVI-D to DVI-D	USB Cable	MultiSync LCD monitor
		male to 15-pin mini		(LCD225WNX only)	(LCD205WNXM/
		D-SUB male			LCD225WNXM only)

*Remember to save your original box and packing material to transport or ship the monitor.

*2 Type of power cord included will depend on the where the LCD monitor is to be shipped.

Quick Start

To attach the MultiSync LCD monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.For the PC or MAC with DVI digital output: Connect the DVI-D signal cable (not included for the U.S. and China) to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure A.2). Tighten all screws.

For the MAC: Connect the MultiSync Macintosh cable adapter (not included) to the computer. Attach the 15-pin mini D-SUB signal cable to the MultiSync Macintosh cable adapter (Figure A.3). Tighten all screws.

NOTE: Some Macintosh systems do not require a Macintosh cable adapter.

Macintosh Cable Adapter (not included)

English

Figure A.1 Figure A.2 Figure A.3

English-3