OPERATING TIPS

Clean the lint filter

After each load.

To shorten drying time.

To operate more efficiently.

NOTE

Do not operate the dryer without the lint filter in place.

Load the dryer properly

• By placing only one wash load in the

dryer at a time.

Add a fabric softener sheet (if desired)

• Avoid very small loads or mixing heavy-

weight and lightweight clothes.

• When only one or two articles need dry-

ing, add a few similar items to improve

tumbling and drying efficiency.

• When drying large, bulky items such as

a blanket or comforter, it may be neces-

sary to reposition the load during the

cycle to ensure even drying.

After loading the dryer.

To control static cling.

Before the load becomes warm. This helps prevent greasy-looking softener stains.

And remove any used softener sheets from the dryer to prevent greasy-looking softener stains.

Check the moisture monitor

Indicator lights in the moisture monitor will display when an IntelliDry cycle is in opera- tion. The top light will blink on and off. As loads dry, there will be longer pauses between each blink. No lights will display during Time Dry or Air Fluff.

The bottom light in the monitor will remain on until the cool down portion of the cycle starts. During cool down the dryer continues to tumble the load in unheated air to help minimize wrinkling.

NOTE

The top monitor light may not blink when small loads of heavy, bulky items are dried, such as rugs or sweaters.

4

Page 5
Image 5
NEC MD-15 warranty Clean the lint filter, Load the dryer properly