NEC MobilePro 880 Using the IR Port

4-22 Using the NEC MobilePro

Follow these steps to remove a CompactFlash card from the

MobilePro.

Note:

Pivot the CompactFlash card button

out of the recessed space before beginning the

following procedure.

1. Save your data if you are storing it on the inserted

CompactFlash card.

2. Press the button beside the CompactFlash card.

3. When the card pops out slightly, pull it out of the slot.

Using the IR Port

With the NEC MobilePro, you can send and receive data to

and from another similarly equipped device using the infrared

(IrDA) communication port. In addition, you can use the IR

port to synchronize data with your host PC, in place of using

the PC Connect (serial) cable.

Before using the NEC MobilePro for IrDA communication,

first configure/enable the IR port on your host system, then

install Microsoft ActiveSync on your host system.

Note:

If you configure/enable the IrDA port

on your host system after installing Microsoft

ActiveSync, you must re-install Microsoft

ActiveSync before establishing IrDA

communication between systems.