5-6 Setting Up a Remote Connection
Connecting to a Remote AccessServer
Once you establish an account with your RAS and gather the
necessary configuration information, you are ready to create a
connection on your MobilePro for your RAS account.
Follow these steps to create a new connection for your RAS
account.
1. Tap Start, Programs, Communication, then select Remote
Networking.
2. Double tap the Make a New Connection icon.
3. Enter a name for the new connection.
4. Select Dial-Up Connection as the connection type and tap
Next.
5. Use the dropdown box to select Internal Modem on COM
4 and tap Configure.
6. Select the required port settings and call options. Tap OK.
7. Tap TCP/IP Settings and configure the required General
Settings and Name Servers. Tap OK.
8. Tap Next and enter the required dial-up telephone
number. Tap Finish.
Once your RAS connection is established you can configure
your MobilePro for sending and receiving email through your
RAS. Follow t he instruct io ns in “Sending and Receiving
Email” and “Activating a Conne c tion,” later in this chapter,
to send and receive email through your RAS.