42

Switching Slides

To switch slides, press "SLIDE +" or "SLIDE -" button. This will cancel
the Auto Play mode. To set the Auto Play mode, press the Menu button
to select “Start” from the Source menu and press the Enter button on the
cabinet or the Left Click button on the remote control. This is valid only
when the Auto Play mode is selected. See more information about “Auto
Play mode” for the Help file included with the Viewer board.
* SLIDE- returns to the previous slide.
SLIDE+ advances to the next slide.
NOTE: Editing tasks such as deleting the data inside the flash memory
card cannot be accomplished with the LCD projector. Use the
exclusive software on your PC for this purpose. If you accidentally
delete data required for playback, playing back the data is not
possible.

Effect Sound

The Viewer function allows you to play back effect sound for the slide.
Playing back effect sound can be accomplished during the switching
slides or files only. To use this feature, you must first specify the effect
sound with the supplied software.
You can adjust volume by using the Volume button.

Capturing the currently displayed screen image

The Viewer feature allows you to capture a screen image and store
it to a flash memory card.
To capture a screen image and store it to a flash memory card;
Select "Capture" from the Settings menu and press the Enter button
on the cabinet or Left Click button on the remote control.
* To view the captured image
1.Select "Select File" from the Source menu and display a list of
files.
* A thumbnail (reduced image) of the first captured image will be
displayed.
2.Use the Mouse pad (+) button to move the Multi-Cursor (blue box) to
the last file and press the Enter button on the cabinet or the Left Click
button on the remote control.
* This will display the image you captured first.
NOTE: The menu indicating that capturing is now performing will
be displayed during capturing. During this time do not remove the
flash memory card nor turn off the power of the LCD projector. Doing
so may destroy the data of the flash memory card.
* When the flash memory card becomes full, replace a new one.

Projecting Pictures a Digital Camera Took

Playing back on the LCD projector is possible if a picture meets one
of the following requirements:
* A picture that can be stored to an MS-DOS-formatted AT A flash
memory card
* A picture that can be stored as a compatible format
The on-board Viewer searches for the directory on the card to
recognize a JPEG or BMP format image as slide. Directories to be
searched for are up to two level from the root directory and must be
less than 16 directories. Although only switching folders and slides
is possible, special effects and displaying a list is not possible.
NOTE:
* Up to 128 images can be recognized as slides for one directory.
* To use special effects, read images from a flash memory card and
edit them using the supplied software, then store them to another
flash memory card.
* If you store indexes to the flash memory card for your digital
camera using the supplied software, images taken with the digital
camera cannot be viewed on the Viewer. So preparing flash
memory cards for a digital camera and Viewer respectively is
recommended.
81
82
8
75 6
4
3
12File File
File File
File File
File File
Multi Cursor
OPERATION