Terminal Panel Features
This panel is located in the side and is where you connect your cables.
1Video Input
Connect a VCR, laser disk player, or document camera here to
project video.
Left Channel/Mono Audio Input Jack
This is your left channel audio input for stereo sound coming from
video equipment or audio system. This also serves as your mon-
aural audio input.
Right Channel Audio Input Jack
This is your right channel audio input for stereo sound.
S-Video Input
Here is where you connect S-Video input from an external source
like a VCR.
2PC Control Port
Use this port to connect your PC to control the MultiSync LT80
Projector. This enables you to use your PC and serial communica-
tion protcol to control the projector. If you are writing your own
program, command reference are on pages 83 to 86.
12
21
INTRODUCTION 22
PC CONTROLVIDEO INPUT
RGB INPUT RGB OUPUT
S-VIDEO
RGB
VIDEO L(MONO) – R-AUDIO
AUDIO RGB AUDIO
3
3RGB Input Connector (Mini D-Sub 15 pin)
Connect your PC or other RGB equipment such as IBM or com-
patible computers. Use the signal cable that's supplied to connect
to a PC.
RGB Audio Input Mini Jack
This is where you connect RGB audio output from a computer or
another RGB source.
NOTE: S-Video provides more vivid color and higher resolution than
the traditional composite video format.