NEC MultiSync P750

5Quick Start

4. Make sure the BNC/D-SUB Switch on the front of the monitor

is set to the D-SUB (in) position.

For the PC: Connect the 15-pin mini D-SUB (the smaller

connector) end of the MultiCable™ connection system to the

connector of the display card in your system. Connect the

15-pin D-SUB (the larger connector) end of the MultiCable

connection system to the monitor.

For the Mac: Connect the 15-pin D-SUB (the larger connector)

end of the MultiCable connection system to the connector

of the display card. Connect the 15-pin mini D-SUB (the

smaller connector) end of the MultiCable connection

system to the monitor.

5. Connect one end of the power cable to the MultiSync®

750

™

monitor and the other end of the power outlet.

6. Turn on the monitor and the computer.

NOTE: If you have any problems, please refer to the Trouble-

shooting section of this manual.