INTERNAL RINGING CALLS
Lage LED flashing red
0' Lift handset
0 Converse
VOICE ANNOUNCED INTERNAL CALLS 0 Ensure MIC LED
is
lit
0 Respond handsfree or
lift
handset
OUTSIDE RINGING CALtS Large LED flashing green
Press flashing
ANS key or Line key
O
Lift handset
O
Converse
NOTE :
If Ringin
g Line Preference is set i.e.
ANS key is preset
(ANS key LED is tumed
ON by
FNCe ANS), then just lift handset
to answer outside ringing calls.
CALL PICKUP 0
Lift handset
0 Dial Call Pickup code:
Same Tenant
61 (internal or transferred calls only)
Other Tenant (outside calls only)
60 O
Converse
INTERNAL CALLS 0 Lift handset OR press
SPKR key
O
Dial extension number
OR Press Feature Access key or One Touch key
programmed for Direct Station Selection (DSS)
NOTE : When calling a station that is not busy,
dialling 1 after the station number will change
ringing tone to voice or voice to ringing tone.
OUTSIDE CALLS O
Lift
handset
OR press
SPKR key
0
Press
CALL key
OR an idle outside Line key
0 Dial tele
phone number
NOTE: If CALL
key is preset (i.e.
CALL key LED
is turned
ON
by
FNC- CALL), then just lift
handset and dial telephone number.
STATION/SYSTEM SPEED DIAL To dial an outside number from the
Speed Dial Memory:
0 Press
LNR/SPD key and dial Speed Dial
Memory location:
Station Speed Dial
90-99 System Speed Dial
00-89 OR Press Feature Access key or One Touch key
programmed for Station speed Dial
0 Lift handset
NOTE: 1000 System Speed Dial locations
000-
999 can be assigned if no individual
Station Speed Dial locations are allowed