NEC NEAX 2000 IVS2 specifications Event Based Ccis

		EVENT BASED CCIS
Table 1 CCIS Features Available with Event Based CCIS
SERVICE FEATURE	AVAILABILITY	REMARKS
Message Waiting Lamp Setting-Station-CCIS	X	Note 3
Miscellaneous Trunk Access-CCIS	X
Miscellaneous Trunk Restriction-CCIS	X
Multiple Call Forwarding-All Calls-CCIS	X
Multiple Call Forwarding-Busy Line-CCIS	X
Multiple Call Forwarding-Don’t Answer-CCIS	X
Night Connection Fixed-CCIS	X
Night Connection Flexible-CCIS	X
Outgoing Trunk Queuing-CCIS	–
Paging Access-CCIS	X
Restriction from Outgoing Calls-CCIS	X
Single Digit Station Calling-CCIS	X
Station Controlled Conference-CCIS	X	Note 4
Station to Station Calling-CCIS	X
Station to Station Calling-Operator Assistance-CCIS	X
Toll Restriction-3/6 Digit-CCIS	X
Trunk Answer from Any Station-CCIS	X
Trunk to Trunk Restriction-CCIS	X
Uniformed Numbering Plan-CCIS	X
Voice Call-CCIS	X
Voice Mail Integration-CCIS	X
LEGEND
x : Available
– : Not Available

Note 1: The voice channel and the common signaling channel stay connected after the calls finish according to the release timer data. Therefore, while the CCIS link is active, the features are available.

Note 2: The billing information is sent while the CCH link is active. If the sending of billing information fails, it is sent again when a new CCH link is established by next call.

Note 3: As a remote office, this feature is available on NEAX2000 IVS2.

Note 4: An extension of the NEAX2000 IVS2 cannot be a conference leader.

Note 5: This service is available when the Attendant Console is provided at a 2400 IMX office on the network.

NEAX2000 IVS2 ISDN Features and Specifications	Page 9
NDA-24273, Issue 1.0