Connect the Audio Cables
Connect the Video Cables
14
Installation
Connection to RGB PC Monitor
05
Connect an audio cable between the L/R Audio output jacks of the STB and the external speakers
that contain a sound amp. (Purchase separate jacks for PC speakers.)
Connect RGB/HV video output jack of the STB to the RGB jack of the PC monitor. In regard to the
Video Out Mode, select RGB as Video Output Type and select one of 1080i, 720p, 576p according
to Video Output Resolution of your PC monitor.
NOTE
By pressing the remote, V-OUTPUT (2 buttons), you will be able to change the output ‘YPbPr’ and
‘RGB’. (YPbPr selection is usually used for Component Input, while RGB selection is usually used for
PC/HDMI Input)
By pressing the remote, V-FORMAT (2 buttons), you will be able to change the format ‘1080i’,
‘720p’, ‘576p’, ‘576i’.