NEC NHD-3000PVR Factory Default

Factory Default
57
System
11
󳀝Set Factory Default.
1. Press MENUbutton.
2. Use ,button to highlight icon, then press OK
3. Use ,button to select Factory Default, then press OK.
4. Enter password to proceed.
5. Press OKbutton to set to Factory Default.
The factory default password is 0-0-0-0.
For any reason, if you forget the password, Press MENU, CC, 3,6,9 button sequentially, then the
password will be back to ‘0000’ again.
Set to Factory Default takes 25 second.
Dont Power Off during set to Factory Default.
Press MENU button to exit the menu screen.
Press EXITbutton to switch to previous step on the menu screen.