Installation

Powering On/Off the Projector

Powering On the Projector

1.Ensure that the power cable and signal cable are securely connected. The Power LED will flash blue.

2.Remove the lens cap.

3.Turn on the lamp by pressing “Power” on the control panel.

The startup screen (NEC logo) will display and the Power LED will turn blue.

4.Turn on your source (computer, notebook, video player,etc.)

The projector will detect your source automatically.

If you connect multiple sources at the same time, use the

“Source” on the remote control or use “Computer”, “S-Vid- eo”, “Video” on the remote control to switch inputs.

Turn on the projector first and then the signal sources.

1 Lens Cap

2

Power

English ... 12