Appendices

Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.

Lamp Replacing Procedure:

1.Switch off the power to the projector by pressing the Power.

2.Allow the projector to cool down at least 60 minutes.

3.Disconnect the power cable.

4.Use a screwdriver to remove the 2 screws from the cover.

5.Push up and remove the cover.

6.Remove the 2 screws from the lamp module and pull up the lamp bar.

7.Pull out the lamp module by force.

8.Install the new lamp module by reversing the previous steps.

9.After replacing the lamp, turn on the power, and select the menu ->[Reset] ->[Clear Lamp Hours] to reset the lamp usage hours. See page 25.

English ... 34