46
5. Using On-Screen Menu
➑ Menu Descriptions & Functions [Reset]
Returning to Factory Default [Reset]
The Factory Default feature allows you to change adjustments and sett ings to the factory preset for a (all) source (s)
except the following:
[Current Signal]
Resets the adjustments for the current signal to the factor y preset levels.
The items that can be reset are: [Preset], [Contrast], [Brightness], [Color], [Hue], [Sharpness], [Aspect Ratio],
[Horizontal Position], [Vertical Position], [Clock], [Phase], [Noise Reduc tion], and [Telecine].
[All Data]
Reset all the adjustments and settings for all the sign als to the factory preset.
All items can be reset except [Language], [Background], [Communication S peed], [Security], [Lamp Life Re-
maining], and [Lamp Hours Used].
To reset the lamp usage time, see “Clearing Lamp Hour Meter [Clear Lamp Hours]” be low.
Clearing Lamp Hour Meter [Clear La mp Hours]
Resets the lamp clock back to zero. Selecting this o ption displays submenu for a con rmation.
NOTE: Elapsed time of the lamp use will not be affected even when [Reset] is done from the m enu.
NOTE: The projector will turn off and go into standby mode after 2100 hours (up to 3100 hours in Eco mode) of service.
If this happens, press the HELP button on the remote control for 10 seconds to reset the l amp clock back to zero.
When the lamp time clock is reset to zero, the LAMP indicator go es out.
Do this only after replacing the lamp.
[Version]
[Product]
[Serial Number]
[Firmware] Version
[Data] Version