NEC RWC-3217 Operating Instructions, Remote Control Model, ON/OFF button, MODE button, Button

Operating Instructions

Remote Control Model

You can easily operate this air conditioner by pressing relevant button on the control panel as well as the remote controller.

ON/OFF button

The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press this button.

MODE button

Each time MODE button is pressed, the operation mode is changed in sequence:

COOLINGFAN ONLYENERGY SAVINGCOOLING

NOTE: After setting the mode, allow 3 minutes before switching to another mode.

FAN SPEED button

Used to select fan speed in sequence auto, low, medium and high.

TIMER button

Used to set or cancel timer operation.

When the unit is in operation, you can set OFF TIMER. When the unit is off, you can set ON TIMER.

Timer setting range is 0 to 24 hours.

If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only

12 seconds, then LED shifts to display set temperature.

If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit.

Control Panel

SWINGSWING

		C
FAN		HR
SPEED
TIMER	ON/ OFF	MODE

Indication symbols of LED on control panel:

Auto fan speed	Cooling
	C
Low fan speed	HR
	Fan only
	Display set temp
Medium fan speed	Display set timer
	Timer
High fan speed	Energy-saving

Above LED lights on when the relevant mode is in used.

If you want to cancel ON TIMER, press TIMER button again.

Button

Used to set room temperature in COOLING mode or used to set time in TIME R mode.

If the two keys are pressed at the same time,the temperature LED display will alternate between

and .

But the mark of " "or" "you can not change.Usually ,those models used 220V~/50Hz marked with " ",others models marked with " ".

NOTE: Temperature setting range is from 19 (66 ) to 31 (88 ).

SWING button

Used to select start or stop vertical air vanes swinging.

5