Operating Instructions
Remote Controller
The remote controller transmits signals to the system.
1
2
7
4
3
| 10 |
| 8 |
Power | Timer |
| 9 |
Mode | Swing Power Saver |
5
AutoMid
Fan Speed
6
HighLow
_+
Temp/Time
1POWER Buttom
The appliance will start when it is energized or will stop when it is
in operation, if you press this button.
2MODE Buttom
Used to select the operation mode.
3 Buttoms
Used to set room temperature in COOLING mode or used to set time in TI MER mode.
4HIGH Buttom
Used to select the high fan speed mode.
5MID Buttom
Used to select the Mid fan speed mode.
6LOW Buttom
Used to select the Low fan speed mode.
7AUTO Buttom
Used to select the Auto fan speed mode.
8TIMER Buttom
Used to set or cancel timer operation..
9POWER Buttom
Used to select the
10SWING Buttom
Used to select start or stop vertical air vanes swinging.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
6