Instructions for use
5Then enter the code noted in step 2 using the digital keys.
– The TV key will now flash twice.
If the key flashes once for an extended period, the code has not been entered properly or the wrong code has been entered.
Start again from step 2.
6Point the SRU 5030 at the TV and check that it responds as it should.
– If the TV responds to all of the key commands, the SRU 5030 is ready for use. Do not forget to note your code.
•If the device does not respond at all, or not to all of the
key commands, start again from step 2 and try the next code from the list.
3. Keys and functions
The illustration on page 3 gives an overview of all keys and their functions.
1 | y Standby. . . . . . . . . switches TV,VCR or DVD on or off. |
2 | . . . - teletext on/off ( ); |
|
| - text mix ( | ); |
|
| - text off ( | ); |
|
| - wide screen TV ( ); | |
|
| - enlarge ( | ); |
|
| - text hold ( | ). |
3 | MENU | turns the menu on and off. | |
4 | Cursor keys | cursor up, down, left, right in a menu. | |
5 | A/V | switches between external inputs of your | |
|
| equipment. |
|
6 | s | mutes the sound of the TV. | |
7 | - VOL + | adjusts the TV volume. | |
8 | Digit keys | direct choice of channels and other functions. | |
9 | SHIFT | for extra functions. When pressed at the same | |
|
| time as a second key, the second key will get | |
|
| another function. All blue labelled keys can be used | |
|
| together with SHIFT. For example: | |
| SHIFT + INSTALL installs your TV | ||
| SHIFT + STORE . . | stores TV settings | |
Try out other combinations with the
Only functions featured on the original remote control are available.
0 5 | - red teletext key |
| - rewind (VCR/DVD) |
2 | - index |
| - play (VCR/DVD) |
6 | - blue teletext key |
| - wind (VCR/DVD) |
9 | - green teletext key |
| - stop (VCR/DVD) |
0 | record |
; | - yellow teletext key |
| - pause (VCR/DVD) |
English
7
