NEC manual 41

4. Convenient Features

Changing Eco Mode

This feature enables you to select two brightness modes of the lamp:

OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE].

[ECO MODE]	Description	Status of LAMP indicator
[OFF]	This is the default setting (100% Brightness).	Off	LAMP
			STATUS
[ON]	Select this mode to increase the lamp life (approx.	Steady Green light	LAMP
	90% Brightness on V260X/V230X/V260/V230/
			STATUS
	V260W and approx.75% Brightness on V300X/
	V300W.)

To turn on the [ECO MODE], do the following:

1. Press the ECO button on the remote control to display [ECO MODE] screen.

2. Use the  or  button to select [ON].

3. Press the ENTER button.

To change from [ON] to [OFF], Go back to Step 2 and select [OFF].

Repeat Step 3.

NOTE:

•The [ECO MODE] can be changed by using the menu. Select [SETUP] → [GENERAL] → [ECO MODE].

•The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.] →[USAGE TIME].

•The projector will always enter into the [ECO MODE] [ON] condition for 90 seconds immediately after the projector is turned on. The lamp condition will not be affected even when [ECO MODE] is changed within this time period.

•After a lapse of 45 seconds from when the projector displays a blue, black or logo screen, [ECO MODE] will automatically switch to [ON]. This is done only when [ECO MODE] is set to [OFF].

•If the projector is overheated in [OFF] mode, there may be a case where the [ECO MODE] automatically changes to [ON] mode to protect the projector. When the projector is in [ON] mode, the picture brightness decreases. When the projector comes back to normal temperature, the [ECO MODE] returns to [OFF] mode.

Thermometer symbol [ ] indicates the [ECO MODE] is automatically set to [ON] mode because the internal temperature is too high.

32