5. Using On-Screen Menu

V300W/V260W [Computer signal]

Aspect ratio of incoming signal

4:3

5:4

16:9

15:9

16:10

Sample image when the appro-

 

 

 

 

 

priate aspect ratio is automati-

 

 

 

 

 

cally determined

 

 

 

 

 

[Video signal]

Aspect ratio of incoming signal

4:3

Letterbox

Squeeze

Sample image when the aspect

 

 

 

ratio is automatically deter-

 

 

 

mined

 

NOTE: To display a letterbox signal

NOTE: To display a squeezed signal

 

 

properly, select [LETTERBOX].

properly, select [16:9].

TIP:

•The term “letterbox” refers to a more landscape-oriented image when compared to a 4:3 image, which is the standard aspect ratio for a video source.

The letterbox signal has aspect ratios with the vista size “1.85:1” or cinema scope size “2.35:1” for movie film.

•The term “squeeze” refers to the compressed image of which aspect ratio is converted from 16:9 to 4:3.

Adjusting the Vertical Position of Image [POSITION] (V300X/V260X/V230X/V260/V230)

(only when [16:9], [15:9], or [16:10] is selected for [ASPECT RATIO])

When [16:9], [15:9], or [16:10] is selected in [ASPECT RATIO], the image is displayed with black borders on the top and bottom.

You can adjust the vertical position from the top to the bottom of the black area.

Turning on Noise Reduction [NOISE REDUCTION]

This function allows you to select the level of noise reduction.

The projector is set to the optimized level for each signal at the factory.

Select your preference item for your signal when video noise is noticeable.

The options are [OFF], [LOW], [MEDIUM], and [HIGH].

NOTE: This feature is not available for the RGB signal. Noise reduction set to off gives best image quality by way of higher bandwidth. Noise reduction set to on softens the image.

Setting Telecine Mode [TELECINE]

This function allows you to convert motion picture film images into video. The process adds additional frames to the picture in order to increase the frame rate.

NOTE: This feature is available only when an SDTV signal is selected.

OFF ������������������������ Turns off the TELECINE mode.

2-2/2-3 AUTO �������� Detects pull-down correction method. 2-2 ON ������������������� Uses 2-2 pull-down correction method 2-3 ON ������������������� Uses 2-3 pull-down correction method

NOTE: This feature is not available for 480p, 576p, 720p, 1080i and RGB signals.

63