Information OSD
The Information OSD provides information such as: Monitor ID, Input Source, Picture Size, etc.
Press the DISPLAY button on the remote to bring up the Information OSD.
ID number assigned to current monitor*1
ID number assigned monitor to be controlled via
Audio input mode Picture aspect
Input Signal Information Sub picture information
*1: “IR CONTROL” should be set “Primary” or “Secondary”.
*2: “IR CONTROL” should be set “Primary”.
Picture Mode
DVI, VGA, RGB/HV, DPORT
STANDARD 
sRGB 
AMBIENT1 
AMBIENT2 
HIGHBRIGHT
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2,
STANDARD 
CINEMA 
AMBIENT1 
AMBIENT2 
HIGHBRIGHT
AMBIENT Mode
The backlight of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The purpose of this function is to make the viewing experience more comfortable to the eye in a variety of lighting conditions.
NOTE: When picture mode is set to AMBIENT1 or AMBIENT2, BACKLIGHT, AUTO BRIGHTNESS and BACKLIGHT in SCREEN SAVER function are disabled.
Do not cover Ambient light sensor when you use AMBIENT1 or AMBIENT2 in PICTURE MODE.
AMBIENT parameter setting
PICTURE MODE in OSD, select AMBIENT1 or AMBIENT2 and set IN BRIGHT and IN DARK in each mode.
IN BRIGHT: This is the backlight level that the monitor will go up to when the ambient light level is highest.
IN DARK: This is the level of backlight that the monitor will go down to when the ambient light level is low.
When the AMBIENT function is enabled the Backlight level of the screen changes automatically according to the lighting conditions of the room (Figure 1).
English
BACKLIGHT level set for the monitor to use when ambient lighting level is low.
Factory Setting
IN DARK | IN BRIGHT |
BACKLIGHT range
BACKLIGHT level set for the monitor to use when ambient lighting level is high.
dark | room bright condition | bright | |
|
| Screen Backlight value by AMBIENT1 mode | |
|
| Screen Backlight value by AMBIENT2 mode | |
|
| ||
| Figure 1 |
IN DARK: | BACKLIGHT level set for the monitor to use when ambient lighting level is low. |
IN BRIGHT: | BACKLIGHT level set for the monitor to use when ambient lighting level is high. |
