Alert Mail Setting
http://<the Monitor’s IP address>/lanconfi g.html
This option notifi es your computer of an error message via
Alert Mail | Checking [ENABLE] will turn on the Alert Mail feature. |
| Checking [DISABLE] will turn off the Alert Mail feature. |
|
|
Host Name | Type in the hostname of the network connected to the monitor. |
| Up to 60 alphanumeric characters can be used. |
|
|
Domain Name | Type in the domain name of the network connected to the monitor. |
| Up to 60 alphanumeric characters can be used. |
|
|
Sender’s Address | Type in the senders address. Up to 60 alphanumeric and symbols characters can be used. |
|
|
SMTP Server | Type in the SMTP server name to be connected to the monitor. |
| Up to 60 alphanumeric characters can be used. |
|
|
Recipient’s Address | Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be used. |
1 to 3 |
|
|
|
Authentication Method | This selects the authentication method of the |
|
|
POP3 Server | This specifi es the address of the POP3 server that is used in the authentication of the |
|
|
User Name | This sets the user name for logging into the authentication server when authentication is required |
| for the |
|
|
Password | This sets the password for logging into the authentication server when authentication is required for |
| the |
|
|
TestMail | Click this button to send a test mail to check if your settings are correct. |
|
|
Apply | Click this button to refl ect the above settings. |
| NOTE: Make sure to execute “the reboot” from the “reboot screen” or to turn the monitor off and |
| then back on to enable the changing, after clicking [Apply]. |
|
|
NOTE: • If you execute a test, you may not receive an Alert mail.
Should this happen, check if the network settings are correct.
•If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient’s Address is correct.
TIP: The Alert Mail settings will not be affected even when [RESET] is done from the menu. For Control command diagram, please see fi le “External_Control.pdf” on the
English
