Connecting Your PC

IBM VGA or Compatibles

(Notebook type)

IBM VGA or Compatibles

(Desktop type)

Signal cable (supplied)

To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied one.

RGB

INPUT

 

 

 

AUDIO

OUTPUT

 

IN

 

PC-

 

OUT

 

OUT

CONTROL

 

IN

S-

 

 

VIDEO

 

 

 

VIDEO

Audio cable

(not supplied)

Connecting your PC to your MultiSync VT440 (SVGA)/ VT540 (XGA) projector will enable you to project your computer’s screen image for an impressive presentation.

To connect to a PC, simply:

1.Turn off the power to your projector and computer.

2.Use the supplied signal cable to connect your PC to the projector.

3.Turn on the projector and the computer.

4.If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you’ve connected to the projector.

E–18