Nespresso Coffeemaker 1 PreParation, 2 cleaningthe caPsuleholDer, 3 DescalingtheMachine

MachineDescalinginstructionsClassic LIne

Read the safety precautions on the descaling package carefully. Avoid contact with eyes, skin, machine and surrounding surfaces. Never use vinegar to descale as it can damage your machine.

1 PreParation

The machine must be off and cold. Remove water tank and drip tray.

2 cleaningthe

caPsuleholDer

1

Remove capsule holder and place hexagonal key (supplied with machine) onto the capsule cage.

Hold key in place.

2 Manual

To unscrew capsule cage: place capsule holder onto hexagonal key and turn capsule holder handle to the left to release capsule cage.

3 Automatic

Manual or Auto- matic: Take out plug, spring and washer ring.

1	2
Dissolve cleaning	Soak capsule holder
agent in 0,5 litres	in solution and leave
of hot water.	for 10 minutes. Rinse
	thoroughly and dry.

3 DescalingtheMachine 4 rinse

1

Dissolve desca- ling liquid in 0.5 litres of water.

Place a container (min. 0.6 litres) under coffee outlet.

Manual

2	Automatic
-

Manual: Switch machine on and turn the lever on the machine to the cup position. Allow entire solution to run through coffee outlet.

or

Automatic: Switch machine on and press the large cup button. Repeat continuously until the water tank is empty.

3

Pour used soluti- on back into the water tank and repeat step 3.2.

1

Rinse water tank thoroughly and refill with fresh water.

Manual	2	Automatic
	-

Manual: Rinse by turning the le- ver on the machine to the cup position, and allowing a tank full of water to run through the coffee outlet.

or

Automatic: To rinse, press the large cup button. Repeat until the water tank is empty.

5 cleaningthecaPsulecage

EN

1

Clean the channel of the capsule cage and press needle (supplied with the machine) through the small pin holes.

2	3
Blow hard through	Rinse.
capsule cage in the
arrowed direction.

Water hardness	Descale after...
Soft	1200
Average	600
Hard	300

At least 2–3 times per year!

6 re­asseMBly

				Automatic	CAUTION HOT!
	1	Manual	2
	Be sure washer ring		Manual or Automatic:
	is in place and grease		fit a new plug onto
4	(lubricant supplied in		the spring.
	descaling kit).

3

Insert capsule cage and screw it back in place by hand (anti-clockwise), as far as it will go.

4

Gently tighten capsule cage using hexagonal key, placed on the capsule holder.

Do not use extensive force!