NetComm 5303 manual V DC Power Adapter

2The short phone cord has a different connector on each end. Connect the end with the larger connector (RJ45) to

the remaining jack (labeled with a phone jack icon ) on the 48 V DC Power Adapter. Refer to Figure 2.

3Connect the other end of the short phone cord to a modular wall jack.

4Plug the supplied power cord into the 48 V DC Power Adapter and into an electrical outlet. Refer to Figure 3 for the over- view of the 5303 Conference Phone setup.

5Using a felt-tip marker, write the unit’s phone number on one of the Phone Number Tags, and attach it to the phone cord.

Refer to Figure 3.

Note: If you experience difficulty setting up a three-way conference call (or activating other service provider features), change the hook flash time. For more information, see the section on the ‘Installation Menu’.

Figure 2: 48 V DC Power Adapter

Caution: Mitel Networks-supplied 48 V DC Power Adapters are the only adapters accepted by Mitel Networks Corporation for connection to the 5303 Conference Phone.

4