Chapter 3: Internet Access
This chapter describes the procedures necessary to configure the basic functions and to start up your NetComm ADSL Modem Router. On successful completion of these procedures, you will
be able to access the Internet via your NetComm ADSL Modem Router.
3-1 Prepare your network information
When setting up your NetComm ADSL Modem Router, in order to allow a quick reference point, it is suggested you complete the table below with the necessary information which should
be supplied by your ISP:
Provided by some ISPs ( ✓tick indicates common minimal requirements)
Host Name: | ______________________________________ |
Domain Name: | ______________________________________ |
WAN/Public IP address given by ISP: ✓
❒Dynamic
❒Static
IP Address: | _________._________._________._________ | |
Subnet Mask: | _________._________._________._________ | |
Default Gateway: | _________._________._________._________ | |
DNS Server Primary: ✓ | _________._________._________._________ | |
DNS Server Secondary: | _________._________._________._________ | |
DNS Server Third: | _________._________._________._________ | |
VPI and VCI values: |
| |
VPI: | ✓ | ______________________________________ |
VCI: | ✓ | ______________________________________ |
Working mode: ✓
❒
❒
❒
❒
❒
❒
❒
Gateway using LLC Encap with Dynamic IP. Gateway using LLC Encap with Static IP. Gateway using Classical IP
Gateway using PPPoE Gateway using PPPoA Router using Classical IP Modem using LLC Encaps.
PPP authentication: |
|
Login Name:✓ | ______________________________________ |
Password: ✓ | ______________________________________ |
www.netcomm.com.au | Rev.1 - YML632 |
Page 18 | ADSL Modem Router |
