NetComm NP740N Default user name admin Default password admin 6. Click ‘QuickSetup’, YML888

3.After the IP address setup is complete, please click ‘start’ -> ‘run’ at the bottom-lower corner of your desktop, then input ‘cmd’ and click ‘OK’.

4.Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address followed by ‘Default Gateway’ (In this example, the IP address of router is 192.168.1.1)

Please note that this value may be different.

5.Start the web browser and input the IP address of wireless router in address bar, and the following message should be shown. Please input user name and password, then click ‘OK’ to access web management interface of wireless router.

Default user name: admin

Default password: admin

6.Click ‘QuickSetup’

YML888	NP740N 11n Wireless Router Quick Start G�uide
www.netcomm.com.au