ADSL Modem Router Setup Manual
The Router’s Front Panel
The ADSL modem router front panel shown below contains status LEDs.
1 | 2 | 3 | 4 |
Figure
You can use the LEDs to verify various conditions. Table
Table | LED Descriptions | |||
|
|
| ||
Label | Activity | Description | ||
|
|
|
| |
1. | Power | On | Power is supplied to the router. | |
Off | Power is not supplied to the router. | |||
|
| |||
|
|
|
| |
2. | Test | On | The system is initializing. | |
Off | The system is ready and running. | |||
|
| |||
|
|
|
| |
|
| Blink | Indicates ADSL training. | |
3. | Internet | On | The Internet port has detected a link with an attached device. | |
|
| Blink | Data is being transmitted or received by the Internet port. | |
|
| On (Green) | The Local port has detected a link with a 100 Mbps device. | |
|
| Blink (Green) | Data is being transmitted or received at 100 Mbps. | |
4. | LAN | On (Amber) | The Local port has detected a link with a 10 Mbps device. | |
|
| Blink (Amber) | Data is being transmitted or received at 10 Mbps. | |
|
| Off | No link is detected on this port. |
Connecting the Router to the Internet |
v1.1,