NETGEAR DGN1000v3 Set Up a Wireless Schedule

Advanced Settings

92

N150 Wireless ADSL2+ Modem Router DGN1000v3

wireless networks in your environments, you can clear the Enable 20/40 MHz

Coexistence check box to increase the wireless speed to the maximum supported speed.

WARNING:

The Fragmentation Length, CTS/RTS Threshold, and Preamble

Mode options are reserved for wireless testing and advanced

configuration only. Do not change these settings unless directed

by NETGEAR support. Incorrect settings might disable the

wireless function of the modem router unexpectedly.

4. (Optional) Lower the wireless transmit power by selecting a value lower than 100% from the

Transmit Power Control menu.

The setting of 100% allows the modem router to use the maximum wireless transmit

power to transmit wireless packets. Reducing the transmit power can save the power

consumption for the modem router but also reduces the wireless coverage. If you want to

have maximum wireless coverage, NETGEAR recommends that you leave the setting on

the Transmit Power Control menu at 100%.

5. Click the Apply button.

Your changes take effect.

Set Up a Wireless Schedule

You can use this feature to turn off the wireless signal from your modem router at times when

you do not need a wireless connection. For example, you might turn it off for the weekend if

you leave town. You can create up to 20 wireless schedules.

Note: You can configure a wireless schedule only if the modem router

obtained its network time. If you do not have a DSL or Internet

connection, the modem router cannot reach a network time server,

and you cannot configure a wireless schedule.

To configure and enable a wireless schedule:

1. Select ADVANCED > Advanced Setup > Wireless Settings.

The Advanced Wireless Settings screen displays.

2. Click the Add a new period button.

Contents

Main N150 Wireless ADSL2+ Modem Router DGN1000v3 Support Trademarks Contents Chapter 1 Hardware Setup Chapter 2 Getting Started Chapter 3 NETGEAR genie Basic Settings Chapter 4 NETGEAR genie ADVANCED Home Chapter 5 Security Chapter 6 Administration Chapter 7 Advanced Settings Chapter 8 Troubleshooting Appendix A Supplemental Information Appendix B Notification of Compliance Get to know your modem router Unpack Your Modem Router Hardware Features Front Panel Hardware Setup N150 Wireless ADSL2+ Modem Router DGN1000v3 The following table describes the buttons and LEDs on the front panel. Table 1. Front panel buttons and LEDs Back Panel The back panel has the buttons and port connections as shown in the following figure. Side Panel with Restore Factory Settings Button Bottom Panel Position Your Modem Router ADSL Microfilters One-Line ADSL Microfilter Two-Line ADSL Microfilter Summary Cable Your Modem Router Connect to the modem router Modem Router Setup Preparation Use Standard TCP/IP Properties for DHCP Gather ISP Information Wireless Devices and Security Settings Types of Logins and Access NETGEAR genie Setup Use NETGEAR genie after Installation Update the Firmware Dashboard (BASIC Home Screen) Join Your Wireless Network Manual Method Wi-Fi Protected Setup Method NETGEAR genie App and Mobile genie App Your Internet connection and WiFi network xDSL Setup Internet Setup Internet Setup Screen Fields: No Login Required Internet Setup Screen Fields: Login Required Internet Setup Screen Fields: Fields That Display Irrespective of Whether Login Is Required Parental Controls Page Basic Wireless Settings Page Wireless Settings Screen Fields Security Options: WPA-PSK, WPA2-PSK, and WPA-PSK + WPA2-PSK Mixed Mode Security Options: WPA/WPA2 Enterprise Security Options: WEP Page Set Up a Guest Network View Attached Devices Page Specify custom settings Page Setup Menu WAN Setup Page Default DMZ Server Change the MTU Size Page LAN Setup LAN Setup Screen Settings Device Name LAN TCP/IP Setup Use Router as DHCP Server Address Reservation Specify DHCP Server Settings Set Up Address Reservation WPS Wizard for WiFi Connections Page QoS Setup WMM QoS for Wireless Multimedia Applications Quality of Service Priority Rules and Internet Access Manage QoS Rules Page Create a QoS Rule for an Application or Online Game Page Create a QoS Rule for a Modem Router LAN Port Create a QoS Rule for a MAC Address Page Bandwidth Control Page Keep unwanted content out of your network Keyword Blocking of HTTP Traffic Set Up Firewall Rules to Control Network Access Manage Outbound Firewall Rules Page Page Manage Inbound Firewall Rules Add Custom Services to Allow or Block Page Schedule When to Block the Internet Security Event Email Notifications Page Manage your network Update the Modem Router Firmware Page View Router Status Router Information Internet Port Statistics Screen Connection Status Screen Modem Page Wireless Settings Guest Network View and Manage the Logs Page Change Which Actions and Events Are Logged Set Up How the System Logs Are Sent Manage the Configuration File Back Up Settings Restore Configuration Settings Erase the Current Configuration Settings Change the Password Password Recovery Perform Diagnostics Page Page Set up unique situations Advanced Wireless Settings Control the Wireless Radio Set Up a Wireless Schedule Page View or Change WPS Settings Set Up a Wireless Access List by MAC Address Page Wireless Distribution System Set Up the Base Station Set Up a Repeater Page Port Forwarding and Port Triggering Remote Computer Access Basics Port Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers Manage Custom Services for Port Forwarding Page Application Example: Make a Local Web Server Public Set Up and Manage Port Triggering Manage Port Triggering Manage Port Triggering Services Page Dynamic DNS Static Routes Page Remote Management Universal Plug and Play IPv6 Requirements for Entering IPv6 Addresses IPv6 Filtering Auto Detect IPv6 Auto Config Page IPv6 6to4 Tunnel IPv6 Pass Through IPv6 Fixed Page IPv6 DHCP IPv6 PPPoE Page Traffic Meter Page Restricting Internet Traffic by Volume Restricting Internet Traffic by Connection Time Get help with problems Quick Tips Sequence to Restart Your Network Check Ethernet Cable Connections Wireless Settings Network Settings Troubleshoot with the LEDs Power LED Is Off Power LED Is Red Power LED Is Blinking WiFi LED Is Off Cannot Log In to the Modem Router Troubleshoot the Internet Connection ADSL Link DSL LED Is Green DSL LED Is Blinking Green DSL LED Is Off or Internet LED is Off Internet LED Is Red Obtaining an Internet IP Address Troubleshoot PPPoE or PPPoA Troubleshoot Internet Browsing Changes Not Saved Wireless Connectivity Incorrect Date or Time TCP/IP Network Not Responding Test the LAN Path to Your Modem Router Test the Path from Your Computer to a Remote Device A View the factory settings and specifications Supplemental Information Factory Settings Table 3. Factory default settings Table 3. Factory default settings (continued) Supplemental Information Technical and Physical Specifications Table 4. Technical and physical specifications B B. Notification of Compliance NETGEAR wireless routers, gateways, APs Regulatory Compliance Information Europe EU Declaration of Conformity FCC Requirements for Operation in the United States FCC Information to User TV Tuner (on Selected Models) Canadian Department of Communications Radio Interference Regulations Industry Canada Caution: Notification of Compliance IMPORTANT NOTE: Radiation Exposure Statement: NOTE IMPORTANTE: Dclaration d'exposition aux radiations: Interference Reduction Table