NETGEAR EX2700 manual Connect with Web Browser Setup

Models: EX2700

1 16
Download 16 pages 43.72 Kb
Page 7
Image 7

4.Connect your WiFi devices to the new extender network.

Use the same WiFi password that you use for your WiFi router.

5.Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.

The location that you choose must be within the range of your existing WiFi router network.

6.Plug the extender into an electrical outlet.

The Power LED lights green. If the Power LED does not light, press the Power button.

7.Use the Router Link LED on the front panel to help you choose a spot where the extender-to-router connection is optimal.

Connect with Web Browser Setup

1.Use a WiFi network manager on a computer or mobile device to find and connect to the NETGEAR_EXT (SSID) WiFi network.

After the connection with the computer or mobile device is established, the Device Link LED lights.

2.Open a web browser window from the same computer or mobile device.

The browser takes you directly to the NETGEAR genie Smart Setup. If you are not automatically directed to NETGEAR genie, launch a web


Page 7
Image 7
NETGEAR EX2700 manual Connect with Web Browser Setup