NETGEAR manual Install the Network Card, Model FA510 Network Card and RJ-45 adapter cable

Install the Network Card

The Model FA510 Network Card is hot swappable, which means it can be inserted into a PC that is either turned off or powered on.

1.Insert the Model FA510 Network Card into the CardBus slot as illustrated in the figure.

Some PCs have two CardBus slots. The Model FA510 Network Card can be inserted into either slot.

2.Insert the RJ-45 adapter cable into the connector on the edge of the network card.

3.Insert the Category 5 10/100 Mbps UTP cable into the RJ-45 adapter cable.

Model FA510

Network Card and

RJ-45 adapter

cable

9025FA

4.If you have chosen to install the card with the power turned off, turn on the power to the PC.

Model FA510 Network Card Installation Guide