NETGEAR GS108E-100NAS Troubleshooting Tips

Performance Specifications

Frame filter rate 14800 frames/sec max for 10M port; 148,800 frames/sec max

for 100M; 1,488,000 frames/sec max for 1000M port

Frame forward rate 14,800 frames/sec max for 10M port; 148,800 frames/sec max

for 100M port; 1,488,000 frames/sec max for 1000M port

Network latency

(using 64-byte

packets)

1000 Mbps to 1000 Mbps: 2.7 μs max.

Address database size up to 4K MAC addresses

MAC Address

Learning

Automatically updated

Queue buffer 192 KB

NETGEAR Green

features

Auto power-down mode saves energy when ports are unused

Problem Action

Power light is not lit The switch has no power. Make sure that:

• The power cord is properly connected to the switch.

• The power adapter is properly connected to a functioning

power outlet. If it is in a power strip, make sure the power strip

is turned on. If the socket is controlled by a light switch, make

sure the switch is in the on position.

• You are using the NETGEAR power adapter supplied with your

switch.

Port number light is

not lit for a

connected device,

or stays on

continuously

There is a hardware connection problem.

• Make sure the cable connectors are securely plugged in at the

switch and the device.

• Make sure the connected device is turned on.

• If the Ethernet cable is connected to a NIC or other Ethernet

adapter, make sure the card or adapter is installed correctly

and is working.

• Make sure the cable is less than 328 feet (100 meters).

English

Troubleshooting Tips