![Installation Guide](/images/new-backgrounds/146718/1467181x1.webp)
Installation Guide
N300 Wireless Gigabit Router with USB
JNR3210
Package Contents:
N300 Wireless Gigabit Router
with USB
Step 1: | Step 2: | Step 3: |
Unplug the power | Connect one end of the blue | Plug in, then turn on your modem. |
to turn off your modem. | Ethernet cable to your modem, | Wait approximately 2 minutes |
| and the other end to the Internet port | |
| on your router. | until your modem turns on. |
If your modem has a battery backup, first remove and reinsert the battery before connecting your
modem to power.
DSL |
or Cable |
| Laptop or Desktop |
Internet | Computer |
N300 Wireless Gigabit |
Router with USB
Modem
(not included)
Power adapter | Ethernet cable |
Step 4:
Connect the power adapter to the router, then plug it into an outlet. Wait until the wireless LED turns solid green.
If none of the LEDs turn on, make sure that the Power On/Off button is in the ON position (pushed in).
Step 5:
Connect the router to your computer.
Use another Ethernet cable to establish
a wired connection as shown in this diagram.
Optionally, connect wirelessly by using the preset wireless security settings located on the bottom label.
Step 6:
Open a browser.
If the Web page does not display, close and
the User Guide.