NETGEAR MBM621 user manual Attached Devices, Dhcp

Mobile Broadband Modem MBM621 User Manual

Table 2-2.	Modem Status Screen (continued)
Settings and Statistics		Description
WAN Port	Connection Status	The status of the Internet connection.
	IP Address	The IP address of your modem, as seen from the Internet. If the
		modem is not connected to the Internet, this will be blank or
		0.0.0.0
	WAN Protocol	The current connection protocol being used.
	IP Subnet Mask	The subnet mask associated with the Internet IP address
		Domain Name Server.
	Gateway IP Address	This must be a router on the same LAN segment as your
		modem.
	Domain Name Server (DNS)	The DNS server IP addresses used by the modem. These
		addresses are usually obtained dynamically from the ISP.
Connection Status and Refresh buttons
LAN Port	MAC Address	The MAC address of the modem as seen from the LAN.
	IP Address	The LAN IP address of the modem.
	DHCP	Indicates if the modem is acting as a DHCP server for devices
		on your LAN.
	IP Subnet Mask	The subnet mask associated with the
Show Statistics button

Attached Devices

View a list of devices attached to the Mobile Broadband Modem.

Figure 2-3

For each device, the table shows the IP address, device name if available, and the Ethernet MAC address. Note that if the modem is rebooted, the table data is lost until the modem rediscovers the devices. To force the modem to look for attached devices, click Refresh.

2-4 Settings and Maintenance

v1.0, September 2007