I can not print from my computer
•You may not have selected the correct printer in the Print dialog box.
•You may not have configured the computer to work with the print server. Go through procedure 4 on page 6 for each computer that will use the print server.
•The computer may not be communicating to the print server. To test for printing directly from the print server:
1.Open a browser and go to the IP address for the print server. (For example, type http://192.168.0.150 and click Go.)
Note: If you do not know the IP address, you use the NETGEAR Print Server
Administration program. ClickStart. Point to Programs and click NETGEAR Print
Server>NETGEAR Print Server Administration. The Reference Manual on the
Resource CD has full instructions.
2.Click Printer Ports on the left.
3.Click Print Test Page.
4.After the test page prints, click Logout.
5.Click Yes (or OK) if asked about closing the browser window.
Could print previously but can no longer print from my computer
•If the print server is set up to ‘obtain IP address automatically’, the IP address may have changed. Restart your computer. You may also use the IP Setup program on the administrative computer to assign a fixed IP address to the print server. Click Start. Point to Programs and click NETGEAR Print Server>IPSetup.
•The print server may be overheated. Unplug the power adapter and then plug it in again. Remove any paper or other material that may be restricting ventilation. Lower the temperature in the surrounding environment.
10
